Questions & Answers for: isuzu rodeo transfer case problems

...rodeo , has push button on dash. When disengaged the indecator light blinkes and stays in 4 wheel ..what could be problem?? If you have tried shifting stopped and moving, then I'd say the transfer ...

Ad

Question about 2000 Rodeo

3 Answers

...isuzu rodeo. when i press the 4 wheel drive button to engage, it doesnt engageand it blinks not transfer case motor....there is none on a rodeo....trooper has torque on demand.....rodeo problem is ...

Ad

Question about 1998 Rodeo

1 Answer

Isuzu shift problem Hi, I have a 1998 Rodeo with the same problem, the 4WD icon blinks when trying to get out of 4WD. Did you ever get to the bottom of your problem? If so, what was the solution? ...

...isuzu rodeo transmission leaking right above the transfer case on the passenger side there is a 2" circle that looks like can on the inside of the tranny that's where the leak is That is a common ...

Isuzu dealer and have sold many of these gears. You can go to www.myisuzuparts.com section 2-25 the sensor is in rear section of extension housing right side of either trans on 2wd or transfer case if

Question about 2000 Rodeo

1 Answer

...isuzu rodeo 3.2 There is a simple way really of doing it, you can buy a code reader at auto zone or leave the battery disconnected from the vehicle for about a day. The power storage unit in the ecu ...

My Isuzu Rodio keeps poping out of gear when it is in 4wheel drive. What could be the problem? Either you're not getting it fully engaged or the gears in the transfer case are worn.

Question about 2001 Rodeo

1 Answer

transfer case jumps out of gear 3rd used transfer case when n 4wd above 30mph jumps right to nuetral from high am i getting bad t-cases? or do i have other problem I am overlooking,operation of light ...

...isuzu rodeo the gasket for the transmission pan and the transfer case is leaking. i noticed a problem yesterday when i stopped on a hill and started to take off, the vehicle slipped. now it is ...

...rodeo into 4wd. Have you check the transfer case to make sure when you try to engage it that it is locking the case in? If not then you may have a linkage problem, if it is locking it in you may have ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...