transmission fluid. Isuzu Rodeos are unique in the way that they have no dip stick or any way of checking your tranny fluid. You need to take it to a transmission specialist and they can drain all the
...Isuzu Rodeo- What tool/pump is needed to add transmission fluid through the "fill" plug in the transmission? The transmission was slipping, replaced a leaking line, now it only slips around sharp ...
Isuzu Trooper, automatic 2wd. My transmission is slipping upon taking off. What should I do 1st? not to sound obvious, but first check your transmission fluid level, at operating temp, engine running.
Question about 1994 Rodeo
...Isuzu Rodeo turn signals and hazzard lights dont work. Makes buzzing noise with bad relay. With new relay transmission light comes on and transmission slips what causes turn signals and hazard lights ...
Question about 2001 Trooper
...isuzu trooper automatic transmission slip gears and don't change gears when accelerating check the oil level in the transmission. Have a pressure test done on the box to determine if mechanical ...
Question about 1994 Rodeo
Isuzu Rodeo 3.2L V-6, automatic transmission slips from first to second Tranny slips from first to second. Serviced transmission still slips. Any KNOWN fixes?? guesses? there are over 10. 1; low level
take a real isuzu full transmission FSM book. or from the true maker, see that tag on the tranny? it answer that. on most cars. will say like Aisin mfg company model x. or ???????? there are 2 choices
Question about 1996 Trooper
...Isuzu Trooper automatic Transmission with 144,930 miles. The transmission seems to slip slightly when I take off from a complete stop. At 15 miles per hour transmission shifts just fine the rest of ...
Question about 1996 Trooper
isuzu_bighorn_automatic_transmission 5 answers Nov 1, 2009 - Hi, i have got Isuzu Bighorn 3.1D 1993 model. ... When it slips it cant move even if yourave up the engine or even you you put in D1,D2,L..
Question about 1996 Trooper
...Isuzu rodeo transmission light on after flywheel changed It slightly slips in 2nd and 4th gear You need to read the transmission fault codes, this requires a factory scan tool. Most likely you will ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions