Jack up truck. Remove singles or duals as required. Remove 8 bolts from axle shaft end. Use hammer to lightly tap axle shaft from hub and extract by hand axle shaft. Use appropriate spindle nut socket
...jack up one side of front end, rotate wheel while looking in knuckle to see if drive axle turns, if it does, then hubs engaged. Now if someone holds the front d shaft, and wheel won't turn, then both ...
shaft. The bolt I believe is 1 and 1/4 or 1 5/16 normally they only way to get the nut loose is with an air impact wrench, if you don't have a air impact wrench buy a breaker bar that's got a one inch
...shaft all the wires there are like 8 or 12 bolts make shore you have a transmither=n jack and just unbolt it disconnect the batterry, remove the starter motor, remove the drive shaft,remove the cross ...
Usually answered in minutes!
448 Questions
438 Questions
414 Questions
360 Questions
311 Questions