Questions & Answers for: Wrangler jeep 98

...98 Jeep wrangler....when I turn on my hazard lights the left side flashes fast both dash and outside indicators light up....the Right side does not light up either on the outside or dash indicators. ...

Ad

Question about 1998 Wrangler

3 Answers

98 jeepwrangler won't start dear sir; Yesterday my jeep started and ran then this morning it won't. There is plenty of charge on the battery,but when i turn the key there is nothing.There isn't even a

Ad

98 Jeep Wrangler turn signals and flashers don't work My turn signals worked this morning before I got my oil changed. Now the signals and flashers don't work. I checked all the fuses and bulbs, they ...

98 jeep wrangler 4.0 I have a 98 jeep wrangler 4.0 with no tow package; however, I have added a hitch and occasionally wil tow items not weighing over 2,000 lbs. I also have a roof rack. I'm currently

98 Jeep wrangler, fan/air won't cut off I have a 98 Jeep wrangler, and my fan/air conditioner will not cut off, even when the key is out of the ignition. Help? Replace the blower motor resistor. You ...

Question about 1997 Wrangler

1 Answer

...98 wrangler 2.5l fuel pump runs with good pressure. no spark. fuel and volt gauge inop. started jeep one time last winter, ran fine, tried to start this summer, crank, no start. has no communication ...

jeep wrangler sport it doesn't seem to fully disengage. What should I be looking for? are you remembering to unlock your hubs ??? 98 wrangler TJ do not have locking hubs !!!!! Try letting of gas while

98 jeep tj.brake light fuse keeps popping but only brake light fu i have a 98 jeep tj wrangler with the 2.5l motor in it..my problem is actually the taillight i blow fuses like there going out of ...

98 jeep wrangler??? Look for the belt tensioner. On some models, all that is required is to use a socket and ratchet to lift the tensioner. SInce your vehicle is a 98 model, the tensioner should be an

...98 jeep wrangler. It starts and then stops after about 2 seconds.I think the security system in the ECM is shutting down & not letting the injectors fire. Is there a way to get around this? I need my ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...