Questions & Answers for: Suzuki GSX 1100 E jet booking

...if the bike, once running, runs well below 3000rpm? I've experienced this model not liking pilot jet usage due to an accumulation of fine particles in the fuel which build up and block the pilot ...

I need a detailed diagram of the carbs for my 1981 GSX 1100. The one in the Haynes manual I have is not very detailed. Google babbitts sports center.com then click on buy oem parts and then select ...

Managed to talk a freid into selling me his, it Managed to talk a freind into selling me his, it has'nt moved for about 5 years! eventually got it started, but its rough! Carbs are in **** order! I ...

Suzuki 1982 GS1100GL won't accelerate I have a Suzuki 1982 GS1100GL motorcycle. It has been sitting since 1982. I have cleaned the carbs, put new jets and seats. It will start and run, idles fine but ...

My 1983 1100e is overheating. What would cause this? Engine overheating on your Suzuki GSX1100E can be caused by these things: Engine oil level too low. Check the crankcase oil level. Incorrect engine

...pod filters ( 4 inline carbs - 4 individual pod filters ),i heard i will need bigger needles/jets to get the motor to run and idle properly, how do i find out what size i have , and what size

I NEED A REPAIR MANUAL FOR A 1982 SUZUKI GS 1100 AND CANNOT FIND ONE ON THE INTERNET. I found an actual book!Here is the link. http://www.themotorbookstore.com/suzgs193.html I don't see how you couldn

I'm rebuilding & installing a stage 3 jet kit on the carbs of my 82 Suzuki gs 1100E, I believe they are Mikuni CV BS 34SS. My problem is I replaced the pilot air jet and forgot to turn them in and

my diaphrams are old and torn a bit.they are my 1981 suzuki gs1100e.how much does this affect performance.can i repair them? h if not ,how much $ do they cost each? If they have the smalles crack or ...

i bought a 1983 gs1100e i have put a vance and hines 4 into 1 exhaust and installed uni air filters need to know whats the best jets to upgrade to Check into a set of stage 3 jets, you will need to ...