kenmore 80 series heavy duty 3 speed washer fills does not stop overflows This problem is generally caused by a pressure switch failure. The pressure switch controls when to shut the water inlet valve
Question about Ultimate Care II LSQ9549L Top Load Washer
i have a kenmore 80 heavy duty it will not spin washing machine kenmore 80 series heavy duty washing machine does it agitate?check your coupler.
...kenmore 80 series model # 110 20842 990 my washer work really really slow and noisy on hand wash/casual, delicate, and regular speed. It does work proper on heavy duty. what could be wrong? thanks ...
Question about 24902 Top Load Washer
Kenmore series 80 washer only works on heavy duty cycle. My washer overflowed (I had the level switch between tow settings). Now it works , but only on the heavy duty cycle. When I try on the other ...
...Kenmore "heavy duty super capacity plus" washer series 80, model 110.28872890. What is the capacity? I can't find it written anywhere on the machine. 3.2cu ft. Thanks for using FixYa - a 4 THUMBS ...
kenmore washers, heavy duty 80 series, no spin kenmore washers, heavy duty 80 series, extra capacity,no spin cycle Hello, Your problem is going to be with your lid switch, this is located normally ...
Question about 3.2 cu. ft. Plus Top Load Washer
...Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches. 3.5 cubic feet for Series 80 Extra Capacity. Doing ...
What is the capacity of my Kenmore Ultra Fabric Care Heavy Duty 80 series washer? (Model 110 92581100) Thanks. Overloading will damage machine.Fill drum almost half way with clothes.
Question about 3.2 cu. ft. Plus Top Load Washer
...80 washer kenmore model 110.26822690 overflows and won't agitate series 80 washer kenmore model 110.26822690 overflows and won't agitate the lid switch controls the spin cycle, pump ...
Question about 24032\24036 Top Load Washer
...Heavy Duty Kenmore Washer (Model #: 110.92274100). No matter what load selection I put the switch in, it only agitates in the Heavy Duty mode. So Normal wash = Heavy Duty agitate, Perm Press = Heavy ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions