Questions & Answers for: kenmore washer no cold water

kenmore 80 series top loader the washer will not fill with cold water only hot water The washer will only fill with hot water. If you put the water setting on cold cold or warm cold it does nothing. I

Kenmore washer: no cold water re: Kenmore 80 series 110.26822692 I get plenty of hot water, and just dribbles of cold water. I've checked the following: 1. the cold water pressure is good. 2. the cold

...Kenmore top load washer My 6 1/2 year-old Kenmore top-load washer will not fill with cold water. When I choose warm, I get hot. When I choose cold, it just hums. I have taken off the cold water line ...

...washer (Kenmore Elite 110-230321-00) seems to get very little cold water, but plenty of hot water...the water lines to it are clear (replaced), but whever I use cold or wam water it is usually only ...

...Kenmore 80 series top-load Washer it sounds like the hot water supply hose on the back inlet water valve is not opening up,to check it switch the hoses,cold on hot,and hot on cold,put the washer on ...

Kenmore HE 3.8 washer has only hot water even with cold settings No matter which temp setting the washer washes with really hot water. If the washer fills very slowly when you have it on a cold ...

...Kenmore 110 92587210 Washer is slowly letting water in My Kenmore 110 92587210 Washer is slowly letting cold water into the washer at all times. If I turn off the cold water, it will not leak hot ...

...washer takes forever Kenmore 90 Plus Series washer washer takes forever to fill during rinse cycle (cold water) is the cold water all the way on? if so, the first thing to do would be to check the ...

...Kenmore washer model 110.98762792 and im having a problem with the cold water. When the water temperature switch is set to the cold/cold position the washer does not fill with cold water. W I have a ...

...They look like this https://www.partselect.com/Kenmore-Washer-Valves.htm .. .. Could be a bad water mixing valve cold water solenoid ...