Questions & Answers for: kenmore washer water sitting bleach

Question about 43142 Front Load Washer

1 Answer

washer not always draining My kenmore front loader is not draining properly all the time and the clothes seem to be a bit soapy. i try to make sure its a full load but not too full. also the ...

Ad

...Kenmore Elite Quiet Pak 4 HE3t Washer 1 year old - recently moved to new house. Everything works fine, but now the liquid softener dispenser will not empty. The bleach and washing detergent ...

Ad

Question about 24032\24036 Top Load Washer

1 Answer

...Kenmore top loading washing machine that is 7-8 years old. (model # 110.92575110). It has a fabric softener dispenser that sits on top the agitator. It has stopped dispensing properly. Most of the FS ...

Kenmore/Sears 417.43142200 bleach dispenser not dispensing For about five wash cycles now, the bleach dispenser on this unit is not emptying. In other words, the same bleach has been sitting in the ...

Question about WSXH208A Front Load Washer

2 Answers

...washer. b) Be sure door is closed. c) Open the dispenser drawer and remove the detergent divider from the main wash detergent compartment. See the Use and Care Guide for instructions. No additives ...

Question about Legacy Series Top Load Washer

2 Answers

...washer. b) Be sure door is closed. c) Open the dispenser drawer and remove the detergent divider from the main wash detergent compartment. See the Use and Care Guide for instructions. No additives ...

Question about 3.8 cu. ft. HE3 Front Load Washer

1 Answer

water. The bleach dispenser is a syphon system. When you put in the bleach , it fills the reservoir to a point just below the syphon point. Your bleach tray has a tube attached to it, with a loose cap

Question about 3.8 cu. ft. HE3 Front Load Washer

1 Answer

...washer. I normally never use the dispenser as I usually just pour the bleach into the water, but thought I would actually use it today. Any thoughts? Not sure what model yu have since there is none ...

Question about Elite 45986 Front Load Washer

1 Answer

water with bleach and give it good a scrub with an old toothbrush. The dispenser drawer cavity does not need to be removed for cleaning. Otherwise, you have to remove the top panel, console, toe panel

Question about 45996 Front Load Washer

1 Answer

Kenmore Elite Washer 45996-there is mold in detergent and softner container but more on the holes above it when I pull that tray out to clean it--it is very difficult to clean those holes upside down.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...