...key from ignition. It's an automatic ... any help is appreciated. You either have problem with the shifter assy, or the shifter cable has come out of adjustment. If you remove the shifter bezel and ...
under shifter assembly. The shifter will not shift unless the brake is depress and the key is on. A module or computer recognizes this info and activate solenoid. Easy step is to check all fuses first
shifter, now with the key in and the car running press and hold the pink lever on the right side of the shifter, there is also second pink part( this is the cheap piece of junk that has you doing what
...key forward. your steering wheel is locked. i had same problem with my 2007 sebring went into a store came out car wouldnt come out of park chrysler dealership repaired it ,it was the shifter housing ...
...shifter assembly. This will give you a half inch space in diameter of the assembly to work with. Now you will need to use the needle nose to slightly make a hook out of the spring ends. ...
steering wheel will not lock and ignition key will not turn Slam the shifter from neutral into park and it should be ok. Joe please rate my answer as 4 thumbs up. Thanks.
shifter lever mechanism. 11. Remove cable from firewall grommet by removing grommet assembly nuts. 12. Remove gearshift cable from vehicle. ADJUSTMENT Lift and rotate the gearshift hand lever into the
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions