Stuck keypad may mean relay is turned on. Determine if problem is with the Key Panel or Control by: 1. Pushing CLEAR/OFF pad. 2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds
...all burners. F7 indicates a stuck touch pad key. Try pressing all teh buttons on the key pad to see if one is stuck. If you don't have a stuck key, there may be a problem with the key pad module ...
Stuck keypad may mean relay is turned on. Determine if problem is with the Key Panel or Control by: 1. Pushing CLEAR/OFF pad. 2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds
Question about Profile JKP56 Electric Double Oven
Stuck keypad may mean relay is turned on. Determine if problem is with the Key Panel or Control by: 1. Pushing CLEAR/OFF pad. 2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds
Question about Profile JKP56 Electric Double Oven
...stuck key pad generaly the latter but before replacing any thing turn off breaker for about twenty minuts and thaen reset do not use if oven starts to beep within 24 houres you have a stuck key pad ...
Stuck keypad may mean relay is turned on. Determine if problem is with the Key Panel or Control by: 1. Pushing CLEAR/OFF pad. 2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds
...key shorted or stuck Replace touch pad or if touch pad is part of the clock, replace the (ERC)= Oven control board this depends on the oven everyone but fridgidare is: Function key shorted or stuck ...
...stuck key pad is to push the cancel/off key ( If you haven't already ). If that fails to clear the error try to shut off the 40amp breaker to the range at the service panel, leave it off for several ...
...key is stuck. Is there any way to unstick this or any other key? The key pad is expensive to replace. Hi, Error F7 on your oven means that the keypad is shorted or stuck and to resolve this issue ...
...stuck key should blink. Carefully free the key and perform the test again after proper diagnosis. If button is free but the error code still exists, the electronic control will more than likely need ...
Usually answered in minutes!
924 Questions
608 Questions
343 Questions
293 Questions