Questions & Answers for: knuckle

...remove the front wheel bearing on my 1993 ford escort? Service and Repair Remove front hub/steering knuckle assembly from vehicle. Position front hub/steering knuckle assembly on a press and press ...

...Snap Ring 9 3123 Front Wheel Bearing 10 2K004 Front Disc Brake Rotor Shield 11 3130 Front Wheel Knuckle Wheel Hub, Wheel Knuckle and Wheel Bearing SPECIAL SERVICE TOOL(S) REQUIRED Description

...the front disc brake caliper and adapter as an assembly, and the brake rotor from the steering knuckle. Remove the nut attaching the outer tie rod to the steering knuckle. To do this, hold the ...

...Loosen and remove ABS speed sensor mounting screw. Carefully remove sensor head from steering knuckle. If sensor head is seized due to corrosion, use hammer and brass punch to tap sensor. Tap ...

...(D84L-1123-A) Installer, Wheel Speed Sensor Ring 206-054 (T93P-20202-A) Removal Remove the wheel knuckle. For additional information, refer to Wheel Knuckle in this section.NOTE: When removing the ...

...amp; Installation NOTE: The removal and installation of the wheel bearing and hub from the steering knuckle is only to be done with the steering knuckle removed from the vehicle To Remove: Remove the ...

...separate the front axle shaft from the hub. Remove the 2 mounting bolts from the strut. Remove the knuckle and hub assembly. Remove the lower ball joint from the knuckle. Remove the axle hub snap ...

...front right side of my 1997 accord? You have the fun ones! What you will need to do is remove the knuckle from the vehicle. Remove the axel nut Rmove the caliper Unbolt the brake lines from the ...

...Remove the speed sensor cable routing bracket Speed Sensor Cable Routing Brackets from the steering knuckle. Remove the wiring harness sealing grommet retainer and speed sensor routing bracket from ...

...AND WHEEL MOUNTING Remove the wheel mounting nuts (3), then the tire and wheel assembly (1). FRONT KNUCKLE MOUNTING FRONT KNUCKLE MOUNTING Remove the nut (5) and pinch bolt (4) clamping the ball ...