Label gap The wasp printer will not recognize the gap between labels. Have tried everything WASP's technical supoort offered but to no avail. AutoGap will not work nor will setting the through/no ...
Cant print on butterfly label with Zebra TLP 2844 printer This is a problem of label sensing. You are probably using the Gap sensor on the 2844, unfortunately the shape of the butterfly labels means ...
Question about TLP 3842 Thermal Label Printer
...of the printer is not working The printer is failing to recognise the notched gaps between labels TLP does not support the notched labels bcoz the sensor is in the center.. TLP can detect ...
...label in print preview mode. By gaps, do you mean a "void" area ? Over time, the elements on the printhead will wear down and finally they won't transfer heat to the ribbon. This causes a gap or void ...
...label in print preview mode. The gaps run in the direction of the label feed? You have a bad printhead. Bad dots on the printhead prevent it from printing your format in the areas that you see the ...
...green media guide out from the wall about 1/4 to 1/2 inch, until the white line is under the label path. This green piece holds the label sensor, which needs to be under the labels so it can ...
...label liner or tag stock."Advanced Gap" Select when media is gapped but also has a dark background.This sensor arrangement looks through the ribbon, and will not work if ribbon is too dark."Advanced ...
...by a couple of issues: Dirty sensor (use compressed air and blow out printer) Wrong media (using labels with black bars obscuring the gap and making it non-readable by sensor) Wrong label format ...
Question about ONeil M-4210 RFID Mark II Printer Transfer Unit
My printer says "check supplies". I try feeding the label, almost as if the sensor won't recognize the gap and stops feeding halfway on the label then error light comes on you may =have to do ...
...label will not be correct. The original AC Delco plug was disco'd years ago. New plug is AC Delco 41-103, they come pre-gapped, I believe it was .040. Of course different plugs have different gaps, ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
