LE" error or fault code indicates that the washer motor is either overheating or has lost connection to the motor control circuit board. Turn off the machine for 30 minutes to let the motor cool down.
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
...error code LE Empty Washer and unplug. Hold the start button (arrow with two lines) for 10 seconds. Plug back in and put on the Rinse and Spin cycle (right hand side) I went ahead and ran that cylce ...
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
On LG waser have an Error LE message. Drained the On LG washer have an Error LE message. Drained the water from small hose and cleaned filter but cannot reset error on washer. bad hall sensor
...LE error or fault code indicates that the washer motor is either overheating or has lost connection to the motor control circuit board. Turn off the machine for 30 minutes to let the motor cool down. ...
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
...the LE error code. I turned off the power button and tried again, but after a few seconds it want back to LE. Finally, I unplugged the power cord, plugged it back in, and the washer ran
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
...LE Error code I have restarted unplugged and restarted same error code keeps coming up. What does this mean? I'm having the exact same problem. I've had this washing machine for 5-6 years and ...
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
...error code ''LE'' mean? LE indicates the motor is locked. Check the 3 pin connector at the motor and check the 4 pin connector at the main control if they look good ( no corrosion and fit tight) ...
...LE code stands for locked motor error. When this error code appears in your front load washer it indicates a fault in the motor unit. 1 . Check the connections to the Coil/Stator at the rear of the ...
...LE error. . What could be wrong. can you gus tell me what parts coub the problem pls!!?? Hello & Welcome to FixYa LE error in your LG front load washer is displayed when either the motor is not ...
...error code LE. The washer starts and tries to spin but acts like it is caught. I have tried it empty and it does the same thing. It also makes a funny noise which I can only describe as a hydraulic ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions