Leaking driveshaft seal 2000 jeep grand cherokee, just bought it so I dont have any history on it. I noticed it was leaking oil from the seal on the driveshaft I took it into the shop and they ...
...leaking oil from some place other than axle or filler plug or gasket. cant find leak. 1996 jeep grand cherokee laredo. thank you The only place you did not mention is the pinion seal (at the yoke ...
I am changing the whole rear end on my 1999 Jeep Grand Cherokee Laredo. Replacing it with the same type I'm removing. It looks pretty simple. Is there anything I need to watch for or do? Make sure the
...driveshaft was bad, it wouldn't move, so I'm assuming he's screwing you,since driveshafts don't smoke.LOL. If your front or rearend lube has come all out or very low, you could get smoking from the ...
...leaking. From what you said, it may be the oil pressure sending unit, or that and something else. The clank shifting could be a bad universal joint on the driveshaft. Check those with the suspension ...
IDLES ROUGH ALSO WHEN TURNING THERES A VIBRAISON CHECK THE INTAKE FOR LEAKS, CHECK THE DRIVESHAFTS FOR WORN CV JOINTS
freeze plug in bell housing leaking Sorry to hear that...Transmission needs to be removed to get to it. (driveshafts, transfer case, transmission and trans converter as well as flex plate to be exact)
My 1996 Jeep Grand Cherokee is making a grinding and thumping noise in the rear. I can't distinguish if its coming from underneath or in the rear wheels. The thumping and grinding only happen when I ...
oil leak on rear diff where drive shaft enters diff That's called your pinion seal. You can change it but when removing the driveshaft yoke, it is ESSENTIAL that you count the exact number of ...
...Leaking by axles or input shaft (driveshaft),if it is the pinion change the seal, make a dot mark with a punch on the nut and the pinion before removing the yoke to tight it at the same place, unless ...
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions