LG WM3677HW washer/dryer combo and am wondering where the lint screen is that I should be cleaning. I just moved into an apartment with this unit and figure it's time to clean the lint screen, however
No Manual for my washing machine/dryer combo You can download this manual at http://www.retrevo.com.
Question about WM-3677HW Front Load Washer / Dryer
i'm looking to find acopy of the owners manual i'm looking to find a copy of the owners manual for the wm3677hw combo? please au.lge.com Go to this site and download the pdf file for your model
Question about WM3677HW 3.7 cu.ft. Front Load Washer and Dryer
lg wm3677hw combo washer drain pump repair question Is it possible to repair the drain pump in an lg wm3677hw combo washer by replacing the impeller or do you need to replace the whole pump? Do you ...
Question about WM3677HW 3.7 cu.ft. Front Load Washer and Dryer
LG WM3677HW combo unit sets a LE code and stops in mid cycle. Motor was replaced but still does it. Hi, Sensor maybe??? Here is a tip about the LE code that gives other thoughts also... heatman101
Question about WM3677HW 3.7 cu.ft. Front Load Washer and Dryer
LG WM3677HW all in one washer dryer water not draining and have cleaned out drain filter. what now? i had the same problem turns out it was a pressure sensor. as water fills it the tub air gets pushed
Question about WM3677HW 3.7 cu.ft. Front Load Washer and Dryer
LG WM3677HW - error code OE. During drying cycle, daughter tried to open the door and produced OE Error code. Now in trying to fix this through a new wash cycle, there is now water in there and ...
drum wont rotate The water runs in , but the drum wont rotate back and forth. I tightened loose bolts. It will turn manually, but not on it's own Check ur washer pump
change board LG washer need access to inspect main circuit board Screws for the lid are at the back, normally only two. Then push lid towards the front to release lid from the two clips. assess...ame
Question about WM3677HW 3.7 cu.ft. Front Load Washer and Dryer
...LG Washer Dryer combo loses power 5-10 min into the drying cycle. The machine does not respond to button input for another 5-10 min after it stops. It displays PF once I'm able to power it back on. ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions