Questions & Answers for: lg washer stuck load sensing

...LG front load washer just quit with LE error.Not overloaded or too much detergent. Stopped after filling with water and does not wash. Unplugging to reset did not help. Prior load was pants and socks ...

LG Front Load Washer I have many of the same problems as everyone else, but a different one we have is the cycle always gets stuck at 33 minutes or 7 minutes. The machine was on 33 minutes this ...

...lg front loader washer I have a lg wm1832 front load washer that gives me an error code of fs. Can you help me with this problem. Hello aj546, Kinda figured there was a miscue there with your error ...

...stuck when it is going to start the rinse cycle Top 10 frontload washer problems 1)Water fill problem: water took more than 10 minutes to fill to desired level sometimes indicated as a LF/IE or long ...

LG washer 2016 gets FE warning. What can be the problem Sorry to read about your problem, I hope this helps you out. The error code FE refers to the fact that water is overflowing ( normally means the

...stuck with a washer that is full of dirty stinky water then here are some things to start checking. First get that shop vac out or a bunch of rags and a bucket. The water needs to go. The shop vac ...

...stuck with a washer that is full of dirty stinky water then here are some things to start checking. First get that shop vac out or a bunch of rags and a bucket. The water needs to go. The shop vac ...

...washer that will cause it harm or plug it up. Good luck and thanks for using fixya. Hi, my LG Fuzzy Logic WF-T502A washing machine, washes and drains but will not spin dry. Please advise on what I ...

LG WM2010CW washer does not fill up with water. When I start my washer, the drum tumbles as usual to sense the load of clothing to wash. But once the washer completes this process, it does not fill up

...LG washer stuck on load sensing To reset this issue, the manufacturer advises to unplug the machine, press the Start-Pause button, and hold it in for 5 seconds before restoring power by plugging it ...