Questions & Answers for: license plate frames

license plate light 2003 Deville The locals are using burned out license plate lites as a method to stop drivers in our area especailly around bar closing time. We picked up the required bulbs but ...

license plate being pulled up My Jeep bumper is shorter than the license plate and is connected only by two top bolts on the front of the bumper. Is there any more sturdy way to attach it, since it ...

...License plate, back up bulb housing using a deep socket to get in there. Work it loose from the rear of the car and it will come out just enough to work on the lights. This is tricky since the screw ...

...license plate frame with red LED(wire to brake lights). I have a 93 Chrysler Lebaron Landau 3.0? You'll need a test light and an assistant to push the brake pedal. Find the brake light socket, remove ...

...license plate bulb 2005 cadillac srx Hi, First you have to take out the one and only screw in the rear hatch door - it's where the hand pull down is you use to close the hatch. Then you have to pop ...

license plate mounting frame at any auto part store, it comes with all the hardware you need, you can use a tape measure and small level to get it centered.... You need to find a front, bumper mounted

...of the bike frame. Being from China it may not carry one because you dont need a license here to ride one. But according to someone else it os a plate or he said covered by a plate. Hope this

...License plate frame, will come off the vehicle. Don't do this until you have your new plate or tag. If you're just installing a new registration tag, take the plate off as above. Give it a cleaning ...

...license plate bulb on 2010 Dodge Avenger SXT or where it is located on the vehicle? First start with removing the license plate frame. Then, unscrew the two Torq screws (size: T20?). Wiggle the ...