Question about 24032\24036 Top Load Washer
...lid switch. If the lid switch is not making proper contact, or is broken, the washer will fill, agitate (some model washers won't), then just stop when it gets to the spin cycle. If this is what you ...
Question about 24032\24036 Top Load Washer
...lid switch malfunction. If your model number is correct, the lid switch for your washer is located under the right hand side of the washer casing along the wash tub rim. The switch is activated by a ...
lid switch... sometimes if something heavy or someone sits on the lid, it can tweak it just enough so the lid switch loses contact and will keep the machine from turning on. You can sometimes bend the
...lid switch. The lid switch will be located on the machine top where the lid closes. It may be a plunger on the lid that activates the switch or a white plastic flat piece where the lids sets. Either ...
...lid switch. If the lid switch is not making proper contact, or is broken, the washer will fill, agitate (some model washers won't), then just stop when it gets to the spin cycle. If this is what you ...
Question about 3.2 cu. ft. Plus Top Load Washer
lid switch. If the washer fills and doesn't do anything, or stops right after the wash cycle and then does not advance to the rinse cycle or drain, this is commonly caused by a lid switch malfunctuion
LID SWITCH, BUT I'M UNABLE TO ATTATCH LID SWITCH. WHERE DO I ATTATCH THE LID SWITCH ON THE DRUM. I HAVE THE LID SWITCH PLUGED IN BUT CANT MOUNT. it mounts to the metal where the lid closes, not on the
Question about 24032\24036 Top Load Washer
...lid switch malfunction. The lid switch is usually mounted under the washer top casing, on the right hand side on most top load models. It is activated by a plastic piece on the lid (called a "Lid ...
Question about 24032\24036 Top Load Washer
...lid switch. The lid switch is worn internally and is not activating properly when the lid activator hits it. You will need to replace the switch. I have posted a link to a video on how to repair it. ...
Question about 24032\24036 Top Load Washer
...lid safety switch is bad. Replace the switch. If this is a unit with a hidden lid switch, left rear, you may only need tighten your lid hinge screws. Replace the lid switch assembly. By hitting the ...
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions