Questions & Answers for: Maytag lid switch

...lid switch is in the center of the lid. If it "droops" or has been bent, it shaft on the back of the lid cant hit the switch. Open the lid and apply pressure in the bottom, center of the lid. This ...

...Lid Switch for Maytag Atlantis 2002 Washer Model # MAV8600AWQ How to remove console to gain access to the lid switch? It would be great to be able to see a diagram too. Hello, I can help you. Let me ...

...lid switch is not working or may be jammed try opening the top of the back of the washer make sure the lid switch is working im not sure if the mtw range uses switch or magnetic recognision with ...

lid switch. Listen for an audible microswitch click as you just open or close the lid. No click = failed micro-switch. (Item 15 this link) http://www.appliancepartspros.com/partsearch/model.aspx?model

...lid switch is faulty. Open & close the lid slowly & listen carefully for the click of the lid switch. If you do not hear the lid switch, you will need to replace the lid switch. Other testing ...

...lid switch may be out of adjustment or broken. Open the control panel and locate the lid switch.With the control panel open look at the lid switch mechanism as you open and close the lid. Make sure ...

...lid switch as the problem? Hello, No if doesnt rule out the lid switch yet in fact that very likely is the problem,the lid switch asm. is wired through a fuse that if lid switch is bad the fuse will ...

...lid switch hole, tried removing some water, tried jiggling the entire machine, triedswitching all knobs to different settings, and even went just about crazy checking and thinking that the knob just ...

...switch, lid closed. The red wire connect to the other terminal on the toggle switch. Washer sequence, is sensing lid locks, turn toggle on. The next stage is the washer will unlock the lid, the lid ...

...lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a ...