Questions & Answers for: Hummer light bulb

light in...PULL ONE PIN AT A TIME!!! Dont pull it to far away from the hummer as there are wires attached that need to stay attached. 3rd::turn the back of the bulb to unlock it from the lens... 4th::

bulb tab into slot, replace unit back into light housing, turn twist lock sleeve to secure to housing. Dont touch the new bulb with your bare fingers. Skin oils can heat up on the bulb and cause it to

...light went out the other day, and found the metal plates (contacts) in the bulb socket were burnt. Hummer dealer said GM doesn't sell a socket only, but they sell entire lighting system which I'm not ...

light does not work. Changed the bulb and it still does not work. The driver's side rear works and the passenger side works (front and back). Also, when the signal arm is pushed down for the left turn

light bulb? The process for replacing tail light bulbs is the same in all models. If you have a burnt-out tail light bulb, you may need to replace the brake light, the reverse light or the turn signal

My H2 Hummer 2004 day lights fuse are okay and bulb seems to be okay but only 1 day lights working Unfortunately, lots of moisture and junk can get up there and kill the bulb. Remove the bulb, inspect

Passenger side tail light. Turn signal and brake light work but running light does not. Aftermarket LED tail lights installed but stock bulb also does not work. Change the bulbs only Change the bulbs

is my left side light bulb don't turn on when Why is my left side light bulb don't turn on when I put the hids sounds like it's a wiring problem, most likely right at the light conecter itself

...light is out,  but you replaced your burnt bulb might be a bad relay. There's a switch on the brake pedal arm, that controls the brake lights. The switch may need adjustment or replaced. Hope ...

...metal base . If you have the wrong bulb in place the current will short directly across the contacts and the light will not come on and the fuse will blow. Fuses for tail lights will be 5 amp ...