Questions & Answers for: Mitsubishi light bulb

Question about 2004 Endeavor

3 Answers

...LIGHT I HAVE A 2004 MITSUBISHI ENDEAVOR ,THE FRONT RIGHT BULB HAS BLOWED HOW DO I CHANGE IT?? you change the bulb from inside the engine compartment . raise the hood and feel for a plastic retaining ...

Ad

Question about WD-62531 Projection Television

1 Answer

...light on the lamp. There seems to be some sort of winding sound as well. I tried leaving the television off for awhile, but to no avail it was no quick fix. Any suggestions? You lamp bubl has burned ...

Ad

light bulb is also busted. i have the same problem just happen to me if you know how to fix this let me know please. Most bulbs are designed to last about 5 years.  The car is 10 years old. 

Question about WD-52327 52" Rear Projection HDTV-Ready Television

1 Answer

...bulb(steady orange light). i had replaced the bulb 7 months earlier and didn't want to see the light so i reset the lamp timer. well the bulb blew the next time i turned it on and the status light ...

my brake lights turn off when i hit the break with my lights on the rear bulbs are burnt out all cars have two stage light bulbs in the rear just replace the bulbs and that should solve your problem

Question about 2005 Outlander

1 Answer

...light now. Unclip the old bulb. DO NOT TOUCH THE GLASS PART OF THE NEW BULB. Skin oils can cause bulb to blow. Plug the new bulb in. Put it back in the lamp assembly and replace the cap. IF it is the ...

Question about WD-52725 52". Rear Projection HDTV

1 Answer

...the bulb the bulb will be burnt out like a regular light bulb and or shattered. At the shop the first rule was always remove the bulb and look at it. DO NOT touch the front or lense part of the

...Light Bulb Size: 9007 Parking Light Bulb Size: 194NA Front Turn Signal Light Bulb Size: 7507 Or 2827 Rear Turn Signal Light Bulb Size: 7507 Tail Light Bulb Size: 7443 Stop Light Bulb Size: 7443 High ...

light bulb and the one wire on the light bulb connects to that solonoid wire, other wire on the light bulb on the body ground or ground negative. ..once the ignition key is on start position the light

Question about 1998 Lancer

1 Answer

How to install evo 5 tail lights check see tail light lens has 4 screws holding it in place.if so remove 4 screws then remove rear tail light lens then replace tail light bulbs.if you have trouble ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...