Questions & Answers for: Westinghouse Electric no lights

I want to install a light in my garage i have a live source but how do i connect it to the light and wall switch My first response would be to seek help from an electrician or someone qualified to ...

Replacing a pull chain 3-way ceiling fan light switch The ceiling fan has 4 spot lights. My 3-way switch has 3 wires - Red, Black, Blue. Inside the light housing - There are 4 thinner black wires that

...two black wires on the pull chain switch. Thanks in advance - RJB I assume the switch operates the lights only. Besides the ground (green or bare) and the neutrals (4 white wires all connected ...

...is hot-on-old-switch Pull chain and test hot-on-old-switch to both of the other wires. When tester lights up, mark this wire. Pull chain again and test hot-on-old-switch to both of the other wires. ...

need a cover for a westinghouse fan as we want to remove the lights You can usually find stuff like that in the fan section at Home Depot or Lowes. A local ceiling fan/lighting specialty shop will ...

Westinghouse Electric Westinghouse Lighting 3speed Ceiling Fan Switch 7707500 how do I connect wires I have black,white,blue and yellow wires I think black goes in L but at speed 3 not as fast as ...

INSTALLED NEW LIGHT SWITCH IN CEILING FAN LIGHT PULL CHAIN TYPE AND THE LIGHTS WILL NOT TURN OFF WITH THE PULL CHAIN? THERE ARE 4 WHT WIRES AND 4 BLK WIRES IN LIGHT KIT WERE DO THE 2 WIRES FROM THE ...

what pull switch would i need if i had 3 staggered lights and i wanted 1 middle light to light only, then 2 lights to light only (top and bottom lights, middle one off), then all 3 lights to light, ...

light switch by westinghouse 77020 have a harbor bay sierra 3-way ceiling fan with Black, green brown and red wires how do i wire the westinghouse 77020 3-way switch Copy following link for general ...

why does the light work but the fan does not spin? Ther are seep rat power wires for the fan and light the fan wire could become cisconnected