Questions & Answers for: my little house

...You can put holes in the plastic. If this is the yellow house with a pink door and blue roof, the corner shelf will take some elbow grease. It is a little difficult to get it out. Keep tryin

...from the transmission so it is loose, remove the tie straps and the rubber boot, break off the little tabs under the boot. Get a very thin screwdriver and insert into the other end of the

Little metal clamp on my pull string I have a push mower with a weird problem. I was using my mower just fine this afternoon. When I went to restart my mower I noticed this little metal clamp on my ...

...real well. Be careful not to gouge the aluminum.Install the thermostat with the little "tip" facing up.Now put the new gasket and a little sealer on it too.Reverse the previous ...

...leaking maybe the oring on the lid is bad or it is cracked. If it is leaking out the drain hose the little petcock valve is probably bad. That little hose is for draining out water in the filter ...

...hatch are out to the fender. then pull the housing away. on the back of the housing remove the 4 little bolts that hold the board on. pull board away from housing. pull the bad lamp straight away ...

...3 bolts hold on the housing. Remove the housing, replace the thermostat. Keep rags near by for the little tiny bit of coolant that comes out once housing is pulled

...little house on the right side of toolbar disappeared that took me back to homepage after completing something go to the tools go to toolbars go to customize you should see the little house in the ...

...house for my little dog but don't know if to use plastic or wood. What's a better option? I want to build a dog house for my little dog but don't know if to use plastic or wood. ...

...Little Tikes Timbertop Tree House from a yard sale. But it needs a slide. I do not know the year of the Tree House. Where can I find a slide to fit it? from a good hardware shop or joinery supply ...