Questions & Answers for: loose drum lg front load

Question about WM-2077C Front Load Washer

1 Answer

the drum and sometimes will cause an unbalanced load. If your problem is not a simple loading issue, it could be the balance sensor, loose wiring, or possibly the main control board. I hope this helps

Ad

Question about WFT1071TP Top Load Washer

1 Answer

...loose or broken if the leak only occurs during rinse. If it leaks all the time, could be a broken outer drum or worn tub seal. Hold inner drum and turn bothways. If it turns bothways, you have a bad ...

Ad

Question about WM2487H Front Load Washer

1 Answer

...drum light comes on and it sings the song, but does nothing else, including no display lights. Sounds like a connection may have come loose in the move. The top cover comes off fairly easily with the ...

Question about WM1814CW Front Load Washer

1 Answer

...loose. Machine is approximately 7 years old. Not sure if the Product in the drop down box below is the exact machine. This machine has a 30 minute quick cyle if that helps. Thanks Hi, please describe ...

Question about WM-2277HW Front Load Washer

1 Answer

washer drum very loose even when empty. shakes when loaded on high spin. noise also It sounds like one or more of the shock absorbers is broken or has come loose from its mount.

Question about WM2277H Front Load Washer

1 Answer

vibration on 1400 spin If it does it with no clothes in then : Drum Loose, Suspension leg shot Inner drum out of shape

Question about WM2277H Front Load Washer

1 Answer

...with clothes full of water the belt that spins the drum could be worn out or loose. you can adjust it by moving the tenstioner by moving it an tietening it. you may have to use an apropriate ...

Question about WM3677HW 3.7 cu.ft. Front Load Washer and Dryer

1 Answer

drum wont rotate The water runs in , but the drum wont rotate back and forth. I tightened loose bolts. It will turn manually, but not on it's own Check ur washer pump

Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher

1 Answer

LOOSE OR WORN, THE CLUTCH, THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM BEARING, THE DRIVE PULLEY- If the washer is making a loud noise the drive pulley might be worn out, cracked

Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher

1 Answer

drum paddle has broken loose except for 1 final point. It looks like it may be secured by a screw. Is this correct. If so how do I access this screw. Do I need to remove entire drum assembly? The drum

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...