...loud grinding sound. The gears on the cartridge(s) is not turning but rather stripping creating a grinding sound. Reinstall all of the toner cartridges. If that doesn't work, pull each cartridge out ...
Loud and Grinding noise I have the same problem. Replaced the OPC belt and it is still happening. Next I am looking into the ps kit2 which is reading 0% life after just under 2 years. If this is ...
...loud grinding sound when receiving faxes, and the paper is all streaked, poor quality reception. We are still getting the message to change the drum, and have tried going back to the old drum - but ...
Question about CS-8150 Computerized Sewing Machine
...loud grinding noise and the bottom stitches are not picked up. Today I took it apart because I got the "safety mechanism is engaged" when I pushed the needle position button a few too many times. The ...
Question about MFC-9420CN All-In-One Laser Printer
...loud grinding noiz I turn on the machine to a loud grinding noise. I want to print something it makes the sound to photo copy than when it comes to lifting paper from the try I get the grinding noise ...
Printer is making a loud grinding noise and repeats error message that it is unable to initialize clean your printer from dust at two corner of the cartrage rod & put oil.
LOUD Grinding noise when it seems to be running large print offs. It is almost like it gets too hot My 3070CW makes the same noise. It is caused by the transfer belt. One roller is driven by a cog and
Question about DCP-8065DN Black and White Copier
...loud grinding sound resulting in horizonal lines on the copies I hear this loud grinding sound when the machine is copying. The copies have lines running from left to right --- making my copies ...
Question about PC-420
...will not go up and down and control knob will not move and loud grinding sound from motor Sounds like you've either got a heck of a jam going on with thread everywhere, or you've lost a gear or
Question about PC-420
...Loud grinding noise on right side of machine Recently replaced upper and lower fuser rollers. There is a loud grinding noise like gears are not aligned on the right side of the machine when it starts ...
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions