Questions & Answers for: Honda Accord loud grinding

...i get a loud grinding noise. check the transmission oil hot and with engine running in park if ok you may have a bad transmission have it checked by a transmission shop sounds like bad silonoids ...

...loud grinding sou My 1997 Honda Accord power door lock on the passenger makes a loud grinding sound when locking. What could be the probblem? replace the pass side door lock actuator My 1997 Honda ...

loud rumbling noise and vibration coming from the rear of the car. It increases with speed and decreases as I slow down. Sometimes it sounds like a hole or vibration in the muffler, but it also "feels

loud rough sound that sound like something was turning plus a grinding noise.so i tried to use the emergency brake and my car still wouldnt stop one of the calipers on brakes blew a seal or brake line

...loud, drawn out grinding sound when I lock them. What could be the cause of this? The door lock actuator in the door that is making the sound is starting to fail. Replace the lock actuator for that ...

...loud grinding noise and will not start. if its my starter where is it located? I have a 1990 Honda Accord it will be located at transmission going from engine side into bell housing in transmission ...

...loud gear grinding noise. All forward gears work perfectly. What would cause that grinding noise, and how do we fix the problem? all forward gear and reverse selectable bent the front wheel rim hub ...

...loud grinding noise when switching gears from park to reverse and won't go. It is automatic transmission. What could be the problem Based on Info... Possible Sun Gear Failure, or Other Internal. ...

...grinding sound, esp when starting car when cold When I start my car, there is a loud metal on metal sound. It is somewhat like a grind, but it is NOT my brakes. When I back up, it gets louder. When I ...

...grinding when coming to a slow stop or start. Day 1 was just a slight squeal when applying the brakes. Day 2, all day very loud squealing or screeching no change when applying the brakes. Day 3, ...