Questions & Answers for: low brake pedal

Question about 1995 Lumina

1 Answer

Low brake pedal I have a `95 Lumina with ABS and rear drum brakes. It has 250 000KMs. Since I`ve had it the ABS light has been on. I haven`t had it scanned . I have replaced the pads and rotors, and ...

Ad

...brake fluid, if fluid is low light will come on. the only other time is if the brake pedal looses preasure and then the pedal would be low, also you may what to have brakes checked, when fluid goes ...

Ad

Question about 2003 Sierra 1500

1 Answer

low brake pedal - pads and rotors are ok. how do I test the master cylinder? I have also heard that the hoses can cause low pedal. Sounds like Brake fluid is low. Brakes should be bled after fluid is ...

low brake pedal on honda accord lx 96 low brake pedal You need to check the brake fluid if it is low it will take air in the system,you need to take that air lock in order to get a better brake. ...

Question about 2005 Grand Cherokee

1 Answer

...low brake pedal. I have bled the My Jeep has low brake pedal. I have bled the lines, pads are good but still low pedal. what can I do to biuld the pedal? Brakes hold good, though. Some time the brake ...

Question about 2007 ML500

1 Answer

...brake pedal may be high and low at different times. If the vehicle is running the brake pedal will feel the same just about every time. If the car is off and you step on the brakes it will get harder ...

...brake pedal is low and you have rear drum brakes check the rear brakes to make sure they are adjusted correctly. There should be a slight drag of the shoes on the drums when the rear brakes are ...

brake pedal drops very low on first press only Brake pads and rotors are relatively new. On the first press of the brake pedal, the pedal goes very low on each stop. If you press again right ...

...low brake pedal on 2003 toyota 4runner I changed the calipers and bled the brakes several times but the pedal still seems low. I want to bleed the master (as a last resort) but it says I need a scan ...

Question about 2005 LaCrosse

2 Answers

...low circuit to the brake pedal position sensor. The BCM supplies a 10-volt reference through the brake sensor reference voltage circuit to the brake pedal position sensor (BPPS). When the brake pedal ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...