...low idle code and warm ac at idle. 06 f-150 5.4L low idle code and warm ac at idle. Idles around 400. If I rev it above 500, ac gets cold. Any ideas ? Engine light is on, low idle code. Also stalls ...
low idle the problem of my carburetor had no low idle..the engine stop when it goes to low idle Possible causes are clogged idle jet/fuel circuit in your carb. Idle mixture too rich or too lean Idle ...
Question about Powermate Premium Plus 6250W Portable Generator
low idle when there is load on the generator it has idle control. I could not understand, it doesn't go in low idle when load is connected or no? It should go to low speed idle with load under 20 - 30
...low idle test. The low idle numbers were cut exactly in half, but were still 5-10x the max allowable. QUESTION IS, what can cause JUST THE LOW IDLE emissions to be RIDICULOUSLY HIGH while the high ...
...low idle test. The low idle numbers were cut exactly in half, but were still 5-10x the max allowable. QUESTION IS, what can cause JUST THE LOW IDLE emissions to be RIDICULOUSLY HIGH while the high ...
...below norm and car shutoff.the cars idle is low? the idle being low most likely wouldnt set off the light, it has to be whatever is making the engine idle low, such as vacuum leaks or the idle ...
...idle low Car Stalls and idles low http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html ------------ It can be issue with IAC( idle air control valve) causing the problem. ...
chevy pickup low idle rough idle at stop The most common reasons for low idle is a dirty throttle body and a faulty idle air control valve. A miss could also cause the low idle speed but not as likely
Question about Miller 225 Welder Generator 907209 Or 907210
low idle, insted it goes back and forth to high then to low idle? Why does my miller bobcat welder generator not stay at an idle when switched to low idle? The unit may need recalibrating the idle/run
Question about Miller 225 Welder Generator 907209 Or 907210
...low idle, low oil pressure My 05 GMC Yukon XL has been having a very low idle and I'm not sure if it is the oil pump causing the low oil pressure of the low idle. When I give it a hair more gas it ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions