lowering whats the best way to get a 4'' front and 6'' rear drop on a '92 ranger. also, it dies sometimes when it is at idle. shifting it sometimes sputters and acts like it wants to stall out. what ...
upper and lower ball joints i need to replace ball joints i was told the upper and maybe the lower it is now making a clunking noise when turning in slow to park. do i have to take out the spring and ...
How do I remove a gas tank for 1992 Ford Ranger Ext. cab 4x4? place some kind of support under tank remove the strap bolts lower tank till you can reach the fuel lines & wires on top the tank mark
how to change coil spring on 1994 ford ranger RAISE AND SAFELY SUPPORT VECHICLE.PLACE A SUPPORT UNDER THE REAR AXLE.REMOVE NUTS AND BOLTS ATTACHING THE SHOCK ABSORBER TO THE RADIUS ARM.REMOVE THE NUT ...
head lights are to high need to lower there is a bolt on ich light you lower tham by terning with a skrue driver.
1996 Ranger 2wd interior fan blows hi spd only 1996 Ford Ranger 2wd Super Cab a/c heater fan is only blowing high speed. Will not blow at lower speeds. Possible solution is to check the fan speed ...
how do i change upper and lower ball joints on 2000 ford ranger They need to be pressed out then back in. Take it to a shop and save yourself a lot of headache I JUSY DID MY BALLJOINTS UPER AND LOWER ...
What is needed to replace on a 97 ranger 4x4, lower lower what be more specific
on the wiper motor plug i have four pins for argument sake i will refer to left lower right lower upper left and upper right. ok so i have 12 vdc across lower left and lower right, i turn switch on ...
Question about 1987 Ranger
what i the easiest way to get to the 4 bottom bolts of the lower intake manifold on a 1987 ford ranger 2.3 TBI What is the easiest way to remove the 4 bottom bolts from the lower intake manifold on a ...
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions