Question about MACKIE M1400/M1400i Car Audio Amplifier
...power switch for a MACKIE M1400i amplifier acquired the amp as part of a property purchase by my church- there is no switch in the amplifier and I need a new one. The tech rep for MACKIE in Tampa,FL ...
...power on. When I turn on the Hi, when I turn on the switch on my Mackie SWA1501 subwoofer, the blue led on the front turns on for a second or two and then it switches back off again. When this ...
Question about TH-15A Active DJ Powered THUMP Speaker Stand and Cable Set TH-15ASET1
...and goes off but there is no sound short circuit in secundary of the power supply or power amps damaged. Power switch short circuited, change wires to unused terminals of the switch, problem ...
Question about SWA1501 Subwoofer
...mackie swa1501 sub which does not power on. I opened it up and replaced the fuses. I turned on the main switch however the LED which indicates power on still does not come on. Funny thing is that ...
Question about Mr8 Active 8" Powered Studio Monitor
Hi, I have a Mackie MR8 that isn't putting out sound anymore. There were some clicks and pop for a couple days before it happened. The monitor wasn't putting out as much volume compared to
Question about TH-15A Active DJ Powered THUMP Speaker Stand and Cable Set TH-15ASET1
Mackie Thump th15a no sound coming out of the speaker. It has power but no sound. Whether you are experienced in electronics repair? if not, try this simply way: 1: Test whether the power amplifier is
Question about SWA1501 Subwoofer
mackie swa 1501 when you plug in no power checked the outlet their is power checked power cord good. what can i do I have a mackie swa 1501. I want to use last night but when i plug into the outlet no
Question about SWA1501 Subwoofer
...mackie hd1531 has stopped working (no sound) The blue power light is on as is the green light on the back but not the light on the main on/off switch. You need to contact Mackie support for their ...
Question about SWA1501 Subwoofer
Mackie 16.4.2.vlz pro. All the channel overload lights come on as soon as power is applied. Changing control/switch positions has no effect. You probably have issues with caps in the power supply....I
...little or no experience with switch mode power supplies. Take it to a repair agent or replace the power supply board; ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions