Questions & Answers for: main bearing torque

...MAIN BEARING AND BIG END BEARING CAPS FOR ISUZU 4JG2 ENGINE Mains Stage 1 83nm Mains Stage 2 167nm Big ends Stage 1 29nm Big ends Stage 2 45 - 60 degrees Hope this helps 2.3 ENGINE MAIN BEARINGS ...

...main bearing torque specs hi i have a 2003 mazda 6, 3.0 v6 standard and i need the main bearing torque specs and cannot find them anywhere! Please someone help, by the way its for the bottom end!! ...

...main bearing caps are 70 ft/lbs (final torque) & the rod bearing caps are 38 ft/lbs (final torque). If you have the 4.3, the main bearing caps are 77 ft/lbs (final torque) & the rod bearing ...

...TORQUE IS 40 FT LBS MAIN BEARINGS 100 FT LBS. FOR 1981 MODELS. ROD BEARINGS TORQUE IS 40 FT LBS. AND MAIN BEARINGS 100 FT LBS. CYLINDER HEAD BOLTS 80 FT LBS. CRANKSHAFT PULLEY BOLT 225 FT LBS. FAN ...

...Main bearing cap bolts torque: Torque: 27 N·m (275 kgf·cm, 20 ft·lbf) Mark the front of the main bearing cap bolt with paint. Re tighten the main bearing cap bolts by 90 degrees. Check that the ...

...Main Bearing Bolts Torque Suzuki XL7 2.7 2003 - Fixya www.fixya.com/.../t15635769-main_bearing_bolts_torque_suzuki_xl7_... Jan 2, 2013 - Main Bearing Bolts Torque Suzuki XL7 2.7 2003 - Suzuki 2002 ...

...main bearing please. Question edited to add maker (should have model and year). Question moved to Isuzu category. https://www.google.com/search?q=10pc1+main+bearing+torque+specs Isuzu Torque ...

...main bearing cap bolts in three stages in the following sequence:Stage 1: 30 Nm (22 lb-ft) Stage 2: 80 Nm (59 lb-ft) Stage 3: 90 degrees After the final torque of 90 degrees, check the bolt stretch ...

main bearing caps may apply to the 1.4-liter Opel Astra carburetor engine. But as a general rule of thumb, comparable engines often have torque requirements in the range of 60 to 70 Newton-meters (Nm)