...Main Motor Failure) The 57 SERVICE indicates that the DC Controller PCA detected a general motor failure. The Main Motor drives all moving components in the printing process. The Main Motor is a ...
...Main motor lock detection Detail When the main motor encoder pulse is not detected for 100 msec. Cause Main motor unit abnormality Improper connection or disconnection the main motor and the harness. ...
main motor timing out. 2) E010 : Main motor failure Display CodeDetail CodeMain Cause/SymptomCountermeasure E0100000Main motor failure The main motor is faulty. - Check the connector of the main motor
Main motor malfunction.Change the main motor and check the fusing unit.For reset turn OFF and ON the power switch,unpluged the cords and wait 10sec. pluged on and then ON the power switch. C0000: Main
...Main Motor Failure) The 57 SERVICE indicates that the DC Controller PCA detected a general motor failure. The Main Motor drives all moving components in the printing process. The Main Motor is a ...
...main motor rotation detection signal (MLOK*), causing the signal to go '1'. (main motor fault) Possible cause . The main motor (M101) is faulty. The controller PCB is faulty. 1) Connector Is the ...
Main motor lock detection Cause: Main motor unit abnormality Improper connection or disconnection the main motor and the harness. Check connection of the main motor harness/connector. Replace the main
Question about Aficio 2232C Color Copier
...Main motor error The main motor starts or changes speed. The lock signal does not continue for 1 second within 3 seconds. • The main motor starts. The lock signal is detected and operation proceeds ...
Question about MFC 7360N - Multifunction fax / copier / - MFC-7360N-US
...main motor cannot be detected. Turn the power off and then back on again. 1 Flat cable connection failure of main motor Check the flat cable connection of the main motor and reconnect them. 2 Main ...
Question about MFC 7360N - Multifunction fax / copier / - MFC-7360N-US
...Main motor lock detection. The main motor does not rotate. After rotation of the main motor, the motor lock signal is detected for 1 sec or more. During rotation of the main motor, the motor lock ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions