Question about Aficio MP 2000 Black and White Copier
...Main motor error SC 500 The main motor does not reach its operation speed within 0.7 second, or the main motor remains out of its operation speed for 0.7 second after reaching the operation speed. ?? ...
Main Board failure (Motor driver failure). Last fatal error code 30x50 Home position error. Possible causes : Foreign object, Deformation of the Main Frame, Change Lever failure, Paper jam. Last fatal
...the airend. compressor main motor was tripped intermitantly two, three times in a day.we have checked motor winding, ground,filters,and current also nominal. but fault not understood clearly. help
Question about PictureMate 500 InkJet Photo Printer
...main motor overload" error Try to reset the main motor and fan motor over loads by pushing the reset on the overload it self, Then reset the controller. If the error resets, before starting. put ...
Question about PictureMate 500 InkJet Photo Printer
...main motor overload Getting error message of main motor overload then screen goes blank and reboots. I'm not familiar with the Diamond machine but suggest the following. The motor is overheating. Is ...
Question about PictureMate 500 InkJet Photo Printer
...Main motor overload. We have checked the motor and there is no issue with the motor. The computor has locked up and we can not clear the fau lt.. Any ideas?? Most faults on the main motor have to be ...
...main motor overload please wait If it's a Huskylock Serger it means the machine is in a "bind," possibly think fabric, etc. The motor is "overloaded" and shuts down. If it continues after serving for ...
Question about Viking 1
...Motor overload mainly has the following symptoms: 1. The motor generates heat increase; 2. The motor speed drops, and may even drop to zero; 3. The motor has a low-pitched sound and the vibration is ...
Question about Viking 1
...MAIN MOTOR ALARM STAYS ON SCREEN COMP. I.R. SSR60 AND I CAN'T RESET THE ALARM. HOW DO I GET IT BACK TO "READY TO START" Check main motor over load in compressor electrical panel and manually reset ...
main limit switch If the new fan motor still continues to stop, check your motor contactor if it is a three phase motor. Possibly one phase is missing or one contact does not give power. You can check
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions