Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451
Makita batteries make sure the charger is cold or keep it in a cold place, when makitas charges get hot, they will not charge.
Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451
Makita LXT 18V will not charge Yes, makita warn against hot charging even though these batteries and charger are meant to cope, but yes the battery and charger are both cool but as soon as the battery
Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451
Makita BHP451 Question I'm looking for a drill, i summed it up to one of these two Makita BHP451 or Bosch NiCD, what are the strengths and weakness of each drill, which should i buy? Buy a hitachi ...
Question about 12 Volt Cordless Drill/Driver Kit
...MAKITA 18V BHP451 AN THE SPINNING BARREL AT THE BACK OF DRILL KEEPS BURNING UP, HAVE REPLACED ITEM WHICH STILL SEEMS TO BE DOING IT Go to makita website and download the tool parts digram or search ...
Question about LXT202 BHP451 18 Volt Hammer Drill & BTD140 18 Volt Impact Driver Lithium Ion Combo Kit
...brake problem on a makita bhp451 you would need to replace the switch, but before doing that check the brush length for excessive wear. you can go to Makitatools.com for a breakdown for this
Question about LXT202 BHP451 18 Volt Hammer Drill & BTD140 18 Volt Impact Driver Lithium Ion Combo Kit
...Makita BHP451 Li ion battery drill periodically the varible speed does not work, ie. the button works as a on/off switch - any idea what's wrong. Thanks Bjarne Bjarne, odds are the variable speed ...
Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451
...Makita BHP451 drill/hammer when i press a trigger the LED light lights up, but the drill is not spining. my batteries are in perfect condition and charged. I took drill apart and i noticed that one ...
Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451
...makita 18v bhp451 combi drill and dont know where the 2 steel cylinders go from the gearbox end of the drill (i belive) had to open drill to remove a stuck chuck but 2 small steel cylinders/pins or ...
Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451
makita battery won,t charge Return it to the place of purchase if under a year or send it to Makita UK in Milton Keynes
Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451
...by hand My Makita BHP451 won't spin...the torch light comes on when the trigger is pulled but the chuck doesn't spin....although I can still loosen and tighten the chuck by hand. Thanks Dead
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions