Questions & Answers for: maytag atlantis washer tub pump

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...maytag atlantis is inconsitent with water extraction Check the drain pump filter and remove the drain hose where it attatches to the plumbing under the sink/tub and look for any blockage in the drain ...

Ad

Question about Atlantis MAV6000 Top Load Washer

2 Answers

Maytag Washer Washer will fill but will not spin. Buzz on spin setting sounds like motor or switch malfunction. Belt is fine. Sound like you have something stuck in the pump check the hose going into ...

Ad

Question about Atlantis MAV6000 Top Load Washer

2 Answers

Maytag Atlantis MAV6200AWW Washer Problem? My Maytag Atlantis has a strange problem I can?t figure out. When I start the washer it runs fine until it gets to the rinse cycle. Once in the rinse cycle ...

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...during cycle out bottom onto floor We had the same problem. There was a pinhole leak in the hose that connects the tub to the pump. Bought a new hose for under $10 and fixed the problem

Question about Atlantis MAV7551 Top Load Washer

3 Answers

Maytag MAV7650AWW spins during agitate cycle Water is spilling over the rim of the tub, we checked the hoses, the pump, replaced the belt. The tub is spinning during the agitate cycle. Is it the ...

Question about Atlantis MAV6000 Top Load Washer

2 Answers

maytag atlantis washer got water leaking from maytag atlantis washer got water leaking from under it what can be wrong I have an Atlantis myself. There can be several problems. Did you check that the ...

Question about Atlantis MAV6000 Top Load Washer

1 Answer

washer will not drain or spin out. Washer does fill up but will not drain or spin out look underneath is the belt attached? if so then there is something in the hose from the tub to the pump.

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...to order a new hose? This is the hose that connects from the tub to the pump. Enter your model # at www.apliancehelponline.com and use this part # AP4029034. This should be the one for your

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...Maytag Atlantis MAV6200AWW. It often does not empty out the tub when it is finished, and the water is still soapy after it is done. If I turn it back to spin it does and drains ok. If your washer ...

Question about Atlantis MAV7551 Top Load Washer

1 Answer

Water leaks from the bottom Main seal faulty, pump seal faulty, tub to pump hose faulty, outlet hose faulty, hole in plastic outer bowl.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...