Questions & Answers for: where is media tray

Ad

Question about Color LaserJet 3500 Printer

1 Answer

...Tray 3 is installed). Remove any media and continue printing. 13.02.00 (HP 3500) 13.20.00 (HP 3700) Description A media delay jam has occurred in the registration area. Action Check for media stopped ...

Ad

Question about Color LaserJet 3500 Printer

1 Answer

...Tray 1 media tray has stopped feeding automatically. It used to pull when paper was put in it. Now, you have to setup a profile for it to change over to pull from the tray 1. What would cause this to ...

Ad

Question about Color LaserJet 3500 Printer

1 Answer

...tray 1. Insert the media print-side down along the right of the main tray. Make sure the stack of media aligns with the right and back edges of the tray, and does not exceed the line marking in the ...

Question about LaserJet CP3505n Printer

1 Answer

media from the tray. The paper exceeds the maximum stack-height indicator mark in the tray (trays 2 or 3) > Open the tray and verify that the media stack is below the maximum stack-height mark. The

Question about LaserJet CP3505n Printer

1 Answer

...media in tray XX doesn't meet the specified standard of the tray. The specified tray is loaded with media that is longer or shorter in the feed direction than the size configured for the tray. Please ...

Question about LaserJet 1020 Printer

1 Answer

...media from the input tray and straighten the stack of new media. This helps prevent multiple sheets of media from feeding through the printer at one time, reducing media jams. Also go to this link to ...

Question about PagePro 5650EN - Printer - B/W - laser - Legal, A4 - 1200 dpi x 1200 dpi - up to 43 p...

1 Answer

...tray. If the media pressure plate is raised, press down the media pressure plate to lock it into place. Squeeze the media guide (length) and slide it to the desired size. Squeeze the media guide ...

Question about Phaser 7400DN Laser Printer

1 Answer

...media in the trays: - Envelopes, labels, and glossy paper can be printed from Tray 1 (MPT) only. - Transparencies and custom size paper can be printed from Tray 1 (MPT) and Tray 2. - Fan paper, ...

Question about Phaser 7400DN Laser Printer

1 Answer

...tray although i set the default source to "tray" it will always try to pull from the MP tray if it has a media size or type mismatch even if you default to tray 1. Check your media size and ...

Question about LaserJet Enterprise P3015d BW laser Printer

1 Answer

...media input tray and remove any media from the tray. Slide the media guides inward as far as they will go. Press and hold down the tabs inside the media input tray, and slide the media input tray out ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...