...Mitsubishi WD-57833, made a loud popping noise, piture went out, I removed the bulb it is out, but on the back bottom right side has a sparking goiing on inside, is because the buld went out? ...
...screen. optical engine failure. that technology is called DLP digital light processing and it uses a device called a DMD digital micomirror device that has millions of mirrors onthe face and they ...
no picture and a loud clicking sound when turn on the tv I have A sony SXRD 50 inch tv and i am getting sound but no picture
getting little whits dots appearing on my screen. How do I fix this? Check it out required light engine price. Hope this will help you to decide about tv, Thanks.
WD-57833 software update Some of these if they have a photo slot or card sd slot on front you can get a update card from Mitsubishi---with set off insert the card and turn set on---a good idea is to ...
mitubishi wd-73738 turns off after 1 min Lamp was bad, so got a new lamp and housing. Cleaned out all the area inside, then replaced housing and tv turns on and after a min or so, a weird noise then ...
reset lamp timer I don't think that model has that but if it does it will be in the owner manual, what is the issue with the set.
I have white dots all over the screen. Those are called pixels depending on the manufacturer of the tv they may replace depending on age size and location of the dead pixels
Question about WD-57833 57" HDTV
...Mitsubishi wd-57833 ZI just replaced the DLP chip about a year ago and now when I turn it on I hear a fan turn on and go off 3 times and after the 3rd time it shuts off completly I removed the rear ...
Question about Tv Dlp Lamp 915p061010 For Wd-57733, Wd-57734, Wd-57833, Wd-65733
dlp chip after replacing I replaced the dlp chip and the white dots were gone but know the screen has vertical thin white lines and thick grays horizontal bars you will need to pull the chip out &
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions