...sound). The music still comes through but the hiss is constant. Hopefully you were powering ALL interconnected equipment from the SAME receptacle. People can destroy the input circuit of powered ...
I have a KPM 4080 mixer that has a blown 1A fuse. What would be the most common cause. The most common cause of a fuse blowing is excess current... now what has/could cause that is impossible for us ...
...mixer made a loud popping noise and lost sound to speakers during gig, but front power lights stayed on. Accessible fuse good. have it at dealer to see if can be repaired but he needs schematic. ...
No sound from amp I replace the RCA input jacks because one of them lost the outside ring. When I turned it on, no sound. I looked at the board again, and found that while I was soldering on the face ...
The amp won't play stereo sound no matter the cable setup. first check the amp is not burn then check if there is a fus in the amp see if is not burn
...sound When I turn on my mixer the limiter automatically goes on even if no sound is running through. how do i fix this? Hi, i would like to know what you have running into the input side of the mixer ...
Question about Deep End 200HD 200 Watt Bass Amp Head
...mixer and when i power it on i cant usually get sound through the channels when i hook up a mike sometimes the low z input works and sometimes not. the regular line in for the mic has never worked if ...
Usually answered in minutes!
6 Questions
2 Questions
6 Questions
5 Questions
4 Questions
