...mono. My mixer and turntables are in perfect working order I have checked leads and all is good. Hope you can help thenks. Can you please update this with your connections. I assume that you are ...
confuse about the jack what kind of 1/4 jack mono or stereo for the l and right i/o Both stereo and mono jacks will work fine on the inputs, any guitar or mic lead will work a treat. You can use ...
...mixer are ballanced and the jack inputs on the Roland are mono. Does this cause a difficulty? Pete I think the Echo's output goes into the mixer's input.You should be using one's output into other's ...
...mixer using a stereo RCA to single male xlr lead.(male xlr is the mono input on the sub). Will this work? You CANNOT have a stereo set of RCA jacks "wyed" into a single XLR mono input. The RCA output ...
Question about Numark Dxm01 DJ Mixer With Two USB Connections System
...channel 2 stopped working. did u find any solution with the mixer? I have a similar problem. Channel 2 works great, Channel 1 is sending only the Left side, something like Mono instead of
...mono monitoring. My mixer settings are set to stereo and i used my pioneer headphones as a control and they work fine. I have also tried the Sennheisers with my laptop and they work fine. Can you ...
Question about Xenyx 1832fx Mixer 18 Input 32 Bus with Efx USB
...mixer would work with a mac or pc, so what can i do to make them compatible? hello, I have a behringer 1832. the issue I have is that the right channel is out all together. both subs work. it is only ...
Question about Emx88s Powered PA Mixer System
...mixer, but, on the Yorkville I had an unused 1/4" line level output with the monitor mix on it. I bought a cigar-sized, 3-channel headphone amplifier / splitter from Radio Shack, called a Boosteroo. ...
Question about Emx88s Powered PA Mixer System
...mixer board using two radio shack 1/4 mono phone plug to 90 mono (rca) cables (Radio Shack P/N 42-2440 and 42-2440A). When i powered the system up and raised the volume considerably i could hear the ...
Question about SP5 2-Way PA Cabinet (800 Watts, 15 in.)
...works mono. If your source is stereo you will need to use two inputs on the mixer and pan them both to the side you will be sending to the amp. This will cost you two mono inputs on the mixer though. ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions