Question about 2001 Silverado
door actuator-C/K Series To install: Install the mode actuator. Install the screws. Install the adjuster links to the control lever. Connect the electrical connector. Test the circuit operation Sorry,
Question about 2003 Silverado 1500
...mode door GM pt#88986538" or the "mode control cam actuator GM pt#89023358" on the side of the heater case. The door would control where the air comes out and the actuator tells the door where the ...
Question about 2007 Silverado 2500HD
The air conditioning will only work in defrost and floor mode, even if I have the mode on the panel selection. I would say the mode door actuator is bad or the mode door is broken. Thank You, Roy
...door. (1)Heater Core Cover (2)Heater Core (3)A/C Defroster Seal (4)Upper HVAC Module Case (5)Dash Seal (6)A/C Valve (7)Heater/Defroster Valve (8)Temperature Valve (9)A/C Valve Lever (10)Mode Valve ...
Question about 1999 Silverado 1500
...mode door cable, a failed electronic mode door actuator, a broken mode door, or a loose or broken wire or connector.To put it simply, your mode doors are not swithching modes - the reason for ...
I would think the dealer would have an exploded view of the HVAC system that shows the doors and the actuators.There is a recirculation mode door and a floor mode door in addition to the temp control
door in the heater box, there are a few doors to control temp of air and then one for mode (location of air blowing out ) and one for recir. try to locate and unplug it and replace the fuse and see if
...door but I don't even know how to get back in the dash to them The actuators on your vehicle are electric motors. The mode actuator controls where the air comes out. It's located on the opposite ...
Question about 2004 Chevrolet Silverado 1500 SS
where is the vacum hose for the defroster switch located The blend doors are NOT controlled by vacuum. They are controlled by electric mode door actuators.
Usually answered in minutes!
Step 2: Please assign your manual to a product: