Questions & Answers for: motion detector lights

...motion detector lights so both lights operate when either detector is activated (dual master system) yu can't do it with off the shelf detector. Sine the detector is single input. you need serial and ...

...Motion detector light what are settings? Have Heath Zenith #SL-5316 Motion detector light, but no instructions. What are the settings for this unit? I can send a photo of the controls, if you tell me ...

...motion detector switch I want the motion detector to be in the hot line box, and I want a regular 3 way to turn the light on from the load box. So far I can only get the motion detector to turn the ...

...motion detector switch how to wire a cooper 6107 3-way motion detector switch to be compatible with a single pole 6105 motion detector I opened the box and traced the lines to see which are connected ...

...motion detector connects to both of the black wires from the lights. The black wire from the motion detector connects to the incoming black wire from the switch or source. The white wire from the ...

...motion detector? I removed the detector of the wall to paint. While it was off, the red light flashed on and off when there was movement. Replaced the detector on the wall, no Red light. Meanwhile, ...

...motion detector. My system is wireless. At the back of the motion sensor, there is a button. When pushed in, the light does not light up. When released, it lights up. However, when the detector is ...

...motion detector lighting for the driveway I can't find the manual for adjusting and testing my Hampton Bay 7828 Outdoor lighting with motion detectors. I'm not sure how to test or adjust the ...

...motion detector light? - Home ... https://diy.stackexchange.com/questions/.../how-can-i-override-a-motion-detector-light make motion security light stay on Google Search What is the point of having a ...

motion detector light does not Bad bulb or battery Certain motion detectors, including wireless, either are programmed to only use light for testing or have the option of turning it off via a dip ...