Questions & Answers for: motion lights

Have Cooper lighting outdoor motion detected flood Have a Cooper Lighting outdoor motion activated flood light that has quit lighting up, but I can hear a clicking noise when I get near the motion ...

motion lights feed the line power from an independent switch that connects the power to the motion light fixture. Remember never to connect the white conductors to any red or black wires, as this will

...lights. The black wire from the motion detector connects to the incoming black wire from the switch or source. The white wire from the motion detector connects to both of the white wires from the ...

...lights and the motion box. 1 black wire and one white per light but the middle has 1 black, 1 white and 1 red. We are hooking it to the porch light and dont know what the red wire goes to? You are ...

Motion light stays on If there is a "sensitivity" setting, it appears to be sett too sensitive, therefore the unit thinks there is constant motion.

Motion sensor outdoor light won't go off Light stays on won't shut off How long has this been going on? Has this light fixture been updated recently? Has the lite switch been changed that ...

...has adjustment dials. Motion sensor that lights in day has probably gone bad. Occupancy switch and motion sensor wire the same: http://waterheatertimer.org/How-to-wire-occupancy-switch.html Gene ...

lights are on and motion is sensed they will turn off. My preference is to connect the contacts of the security device across the travelers of the three way circuit. The travelers are probably the red

Brinks motion activated security light model 7160w. Only stays on for about 15 seconds. Setting is on 10 minutes. Can someone help? Sounds like the motion sensor is not picking up motion. Or, does it ...

motion lights if you switch them on and off two or three times and then back to on, the light will stay on all the time. To put it back to motion, switch off, wait a minute and then switch to on. This