Questions & Answers for: motor winding Cars & Trucks

Question about 2000 Venture

1 Answer

...motor. The hold-in winding circuit is completed to ground through the solenoid. The windings work together magnetically to pull in and hold in the plunger. The plunger moves the shift lever. This ...

Ad

Question about 2000 Camry

1 Answer

winding it down. I have to wait about 3 to 4 minutes before it will wind up. Most likely the motor for the power window is worn out. It's not that uncommon to replace these motors over time. The motor

Ad

hi, my 91 toyota hi-lux tailgate window winds dwn with the key easily but not up, the motor makes a click when u try wind up, on the drivers button up front u can get the window up but you have to ...

motor winding. The intermittent switch uses the slow speed winding. More often, there are problems with the relay, or at the wiper switch, or in the cable to the motor. Windshield Washer: Don't be too

cannot get the wind shield wiper motor back in the wind shield wiper stops in the middle of the wind shield this is normally caused by a bad wiper motor or binding of the wiper gears and linkage arms.

Question about 2000 Windstar

1 Answer

...motor has a run winding and a start winding and to reverse the direction the connections to one winding, usually the start winding, must be reversed and that is the function of the lathe switch. ...

Question about 2000 Windstar

1 Answer

motor capacitor. where is it located ?? some small AC motors may not have capacitor........normally Blower motors are high speed and high start-up torque just like kitchen blender motors. These motors

...motor has 2 windings, fast and slow. The wiper switch sends a ground signal to each motor winding. There may be a problem on the relay, or at the switch or in the cable to the motor. Hope this

How do I repair a 1990 toyota hiace diesel starter motor 1990 model the motor continualy clicks when turning the key sometimes turning over the motor. It is definetly not a battery power issue. Hold ...

My fan won't turn on in order to get air flow for heat/defrost, do I need to replace Blower Motor or Resistor. I checked the fuse and it's fine Did you check to see if the motor is receiving power? If

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...