chain i heard alot of way to adjust ur chain...does anyone know what ways realy work good.. Put it up on your stand lossen the axel and remove the bolt on the bottom of the shock. Then tighten your ...
Oil check How do I check the oil on my bike? There are usually two methods to check the oil. One is a dipstick and the other is a sight-glass. You should have one or the other somewhere on the side of
Clutch i was wondering what a clutch that needs to be changed looks like? you need a micrometere or vernier caliper to measure how thick they are that how you tell how worn the clutch is. the manual ...
chain lubricant What Chain wax should I use? Is there anything in Halfords that is suitable? when I looked there only seemed to be one chain lubricant which was a spray. I presumed that i'd be able to
i need 2001 husaberg fe 400 plastics i need 2001 husaberg fe 400 black plastics dennis kirk
Hi. My Husaberg fe 400e need 100 houers service. Is this expensive? And what parts do I need??? Do you know where I can get all the parts for a minimum of money..? In Norway they take about 2500 US ...
...kick starter slowly until you get to the hard spot(TDC), pull the decomp lever, and push the kicker a little to get past top dead centre, then release decomp and give it a decent kick, should never ...
how much oil do I put in husaberg 400 2003 if nothing else you shuld have a check bolt on the side of the left or right case
Question about 2001 Fe 400 E
how do i test husaberg 400 fe 2001 cdi / ciol if it working or not Start by sticking the plug to a head bolt for a spark if that don't work the only way u can test it is with a different cdi
Usually answered in minutes!
5 Questions
3 Questions
1 Questions