Questions & Answers for: Harley Davidson XL Sportster 883 motorcycle vibrates clutch pull vibration

Question about 2002 XL Sportster 883

1 Answer

...pull in clutch and noise goes away does not make noise at idle and engine does not is running great at lower rpm's makes no noise only at mid to higher rpms over 2000 can hear noise let throtle close ...

Ad

Question about 2000 XL Sportster 883

1 Answer

Sportster 883 speedometer issue I have a 2000 HD Sportster 883. When I hit a bump my speedometer goes to zero and then moves up to the current speed. Any thoughts on what the problem is? Check the ...

Ad

Question about 2000 XL Sportster 883

1 Answer

...clutch, remove the spring, and the locknut. Turn the adjuster screw counterclockwise until it stops. Turn it back clockwise 1/4 turn. Insert the locknut, the spring and the plate. Screw the cable ...

Question about 2000 XL Sportster 883

1 Answer

replacement Shifter pedal (the part that screws into the lever on the transmission fell off from vibration. This is quite common. You can purchase the replacement either from your local Harley shop or

Question about 2002 XL Sportster 883

1 Answer

clutch release mechanism cover. Take the spring and the lock nut out of the cover. Now, turn the screwdriver slotted acrew counterclockwise until it stops. Then turn it clockwise 1/4 turn. Replace the

Question about 2002 XL Sportster 883

1 Answer

How do I tighten a rear signal light assembly that has vibrated lose not in manual. If their like the old harleys the bolt is in your fender strut and you will have to get the stut bolts off and loose

...please visit the website below. Good luck and have nice day. How to Remove the Clutch Cable on Harley Davidson Big Twin Motorcycle How To Properly Adjust The Clutch Clutch Cable Harley ...

883r with 1200 kit, excess engine vibration increases with rpm it also misses at a certain steady rpm, I dont have a tach. Hi Mike, and the usual suspects are: 1. Wheels and or tires unbalanced, worn ...

...clutch hub do i have to pull hole clutch assembly then seperate inner or if i remove main nut can i pull inner leaving outer on bike You will have to pull the clutch to take it apart on this ...

Got a 2002 sportster and it lunges from time to time in first and second.It starts to go and then hangs for a second and lunges so fast it almost throws you off the bike. I Checked all the adjustments

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...