Questions & Answers for: nad main

...Nad c350 amp: no selection lights hence no play. power light is on and soft clipping light illuminates. Check fuses mounted near transformer . If blown check output transistor. Also check transistor ...

...NAD C370, For some strange reason it blew the the fuse by the on/off switch, I replaced it & it worked ok for a few days, then blew again. I disconnected the leads to the main board, put another fuse ...

...nad C541i's and not so long since the sound on one of them cut out for milliseconds and on some occasions the sound would make the noise very much like a severely scratched vinyl record, i thought it ...

NAD integrated amplifier. OOps - now the CD player doesn't work through the CD input - but works at full blast through the Main input (PreampOut/Main In) have i gone and short-circuited the pre-amp in

...NAD 314 : 35 W PC) with a Main in & preamp out jacks. They have metal jumpers that are u-shaped. I wanted to know if I can use my NAD as a preamp for my Carver M-500t until my old preamp is fixed. I ...

...main-in/out inputs on my NAD CBE 720 receiver to connect a power amp to the pre-in and pre-out, the headphone jack is disabled. Disconnecting the cables into the pre-in/pre-out every time I want to ...

NAD T751 shuts down In standby and shortly after I turn it on there is a click and it shuts down There is a board between the front and the main transformer. It's connected to the front with a wide ...

...and input to 'main in' on the nad, the audible output is vastly reduced. Any help or suggestions please? The driving signal strength and driven signal strength may be

...from the pre-out, and input to 'main in' on the nad, the audible output is vastly reduced. Any help or suggestions please? Connect Denon Pre-out to NAD 3150 Aux, or Tape In, but not phono ...

Nad c160 won't turn on more than a second Just switches off a second after you press the on button. There is power to the main board and the fuses are not blown Check the output for short