Questions & Answers for: nec projector 6 red blinks

Projector gets power, when first turned on power & status light are green. Then to goes into stand by mode power goes to blinking orange, status goes blinking red ( fast blinking) & it shuts off. this

status lamp blinking orange 6 times PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE

my lamp light stays on my status blinks if it's blinking red, how many times? 1 time- lamp cover. 2 times- overheating. 4- fans. 6- lamp. if the lamp led is lit red, replace the lamp.

...6 cycle. Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present. Just an idea? im having them same issue ...

www.retrevo.com/support/NEC-LT35-Projectors-manual/id/357ci857/t/2/ User manual above, use troubleshooting, procedure. neurowww.cwru.edu/_media/.../projector_manual_3062.pdf?id... service manual above

...NEC projector that keeps turning off. NEC LT260. I clenaed the filters, replaced the lamp, and now when I turn on the projector its on for about a minute then shuts itself of. The power button turns ...

...NEC VT470 Projector. The power light is steady orange and the status light blinks red 6 times. steady orange means projector in standby mode red light 6 times is a lamp error. either the lamp is old ...

...if it's a new projector, the lamp can go bad. since you stated that it's new, i would get in contact with NEC support, and let me know what going on. it should be still covered under

...NEC technical support, if the status light flashes red six times, this could indicate a defective lamp. If a new lamp is installed and the project still won't turn on, the projector will need ...

...nec vt540k and it stop projecting images. When i turn it the power led turned in solid green, the fan start working withouth problem but in few seconds the status led turned it in yellow blinking 1 ...