Questions & Answers for: need alignment oldsmobile cutlass ciera

...Need to replace the starter on a 1993 cutlass ciera and have no clue where it's located and what is needed to replace it. According to Chilton's, and assuming you have the 3300 V-6, it won't be fun. ...

...alignment, but the sensor from online parts store look like the other. Your help would be greatly appreciated. The bolt is a right hand thread. And the sensor is not adjustable. It is a straight ...

...need to remove the whole arm to remove the pully from it. I would recommend replacing the whole unit as one as that is the way they normally come from the parts store. I hope this helps. The tension ...

Oldsmobile Cutlass with 3.3 V6. I don't have the tool needed and can not acquire one. I am thinking of destroying my old balancer and some sort of spacer pieces to make a makeshift template guide tool

hit a curb. now my front tire sets at an angle. how do i go about fixing it? either something is bent or shifted out of line, an alignement shop can tell you what you need

...alignment and suspension, and have aligned cars as a professional mechanic, I would not attempt it without the tools a shop has. You should let a shop do this. You need pads for the wheels to rest on ...

alignment is needed When you install the Harmonic Balancer there is a key that guides it so it only goes on one way. If you have replaced the timing chain/belt you need to get the Haynes repair manual

...right. I recently replaced the front, passenger side tire and was told I need an alignment. Is there some other problem that I'm missing? if it was empty, you must have a leak in the steering

door latch wont latch and keep door shut Sometimes these get stuck in the closed position...try pulling up on the inside door release before trying to close again...this re-aligns the catch to work ...

...cutlass a/c making loud noise when a/c is turned on it makes a loud noise as if something is of alignment air compressor clutch bearing is failing - repair if too costly a rebuilt unit installed by ...