how do you replace an in cabin micro filter on a 2008 nissan rogue Remove instrument driver lower cover. Remove accelerator pedal assembly. Remove filter cover and then remove in-cabin microfilter.
...Nissan Rogue is malfunctioning. The car jerks when I accelerate from 0mph, then works fine, but when I get up to 40mph the RPM guage spikes randomly. The Cruise control light "set" blinks ...
Question about 2010 Rogue
my accelerator doesnt respond when i step on it. the speedometer too doesnt go beyond 40km/hr. help me the vdc light is on, the abs light is on. the accelerator doesnt respond and the speedometer ...
...Nissan Rogue SL AWD has sluggish acceleration This started today. Can push the accelerator to the floor and it almost seems to be idling for quite awhile and will not accelerate. First time it ...
Question about 2010 Rogue
...nissan rogue is slow accelerating when gas is pressed, VDC light comes on, what is causing this? once the gas is pressed, the vehicle is slow in accelerating. Once it does accelerate it is ok until ...
Question about 2010 Rogue
nissan rogue. Once it accelerates, it drives ok, until I slow down or come to a complete stop. Once the vehicle starts having problems accelerating when the gas pedal is pushed, the VDC light comes on
Question about 2010 Rogue
Why does my 2013 Nissan Rogue intermittently have high rpms with decreased acceleration? Sounds like my problem on mine which was fixed by replacing the TPS (Throttle POsition Sensor)
Question about 2010 Rogue
...Nissan Rogue and when I push the accelerator there is a loss of power and the ignition is misfiring. Question edited for clarity and spelling. You have an electronics and sensor issue. You need a ...
...Nissan Rogue AWD. When you give it gas it'll go unless you get into the throttle then it will not accelerate. Sometime you can give it gas and it will only go up to about 20 mph. Could it be the fuel ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions