Questions & Answers for: GMC Canyon oil changes

Change oil indicator My change oil flashes in the odometer field when the oil needs to be changed (I almost never let it go that long) But I need to know how to turn it off after the oil is changed ...

low oil in 2005 gmc canyon my check enginge light came on, and my oil light has flashed a couple times recently... i just check my oil (warm) and my dipstick is almost dry looking...oil was changed ...

How do you turn off the oil change light after the oil has been changed? GM Oil Life System This system calculates the estimated percentage of the engine oil�s remaining useful life and ...

...GMC Canyon with a 3.5 engine? this is set from camshaft and crankshaft sensor, always check engine oil for the right vescocity and change oil if necessary to avoid this dtc ...

i have a 2005 gmc canyon with 65k on it, and i havent changed anything but the oil. i bought it used, so i dont know what kind of services it has had done. a friend told me that i should wait till ...

Just had an oil change and now change oil light appears,checked the level and all is well. what to do? The sending unit switch is bad or error needs to be reset. The place who performed your last oil ...

Rear Main Oil Seal leak 2008 GMC Canyon Small oil leak coming from rubber grommet behind the oil pan and before the transmission I think this is for an oil level sensor. Should be easy to change , or ...

how do i errase the message change oil .i did change the oil last week and the message is till there tank you Turn off the switch press brakes and turn on switch. I hope this procedure works for your ...

How do I tune it up? Oil Change & Filter Transmission Fluid Change & Filter Fuel filter Air Filter Plugs, wires/boots, cap & rotor if applicable Clean the MAF sensor with MAF spray. Clean ...

P0014 Diagnostic code, already replaced camshaft actuator & oil twice code p0014 - Chevy TrailBlazer, TrailBlazer SS and GMC Envoy Forum forums.trailvoy.com > ... > OEM Issues Sep 8, 2007 - 11 posts -